Samsung Galaxy S22 Plus cases and screen protectors

Samsung Galaxy S22+ Cases & Screen Protectors: Complete Guide

MEZON

The Samsung Galaxy S22+ keeps the same core camera system as the standard S22 but adds a larger 6.6-inch display, bigger battery and faster wired charging. MEZON currently offers six accessories for it: a clear TPU case plus five screen-protection styles, including privacy glass.

1. Make sure yours is the Galaxy S22+

Check Settings → About phone and confirm the device is Galaxy S22+. The standard S22 is smaller, while the S22 Ultra uses a different body and curved QHD+ display.

2. Samsung Galaxy S22+ at a glance

  • 6.6-inch FHD+ Dynamic AMOLED 2X: Adaptive 10–120Hz refresh rate.
  • Up to 1750 nits peak brightness: Considerably brighter at peak than the standard S22.
  • Ultrasonic in-display fingerprint sensor: Test recognition after installing any thicker protector.
  • 50MP + 12MP + 10MP camera system: Main, ultra-wide and 3× telephoto cameras.
  • 4500mAh battery: Larger than the S22 battery and supports up to 45W wired charging.
  • About 196g and 7.6mm: Larger in hand, making a grippy case especially useful.

Samsung Galaxy S22+ cases and screen protectors

3. Larger display, larger exposed surface

The 6.6-inch panel gives you more room for content but also more front glass exposed to scratches. A protector and slim case cover different risks: the protector takes front-surface wear, while the case helps with grip, corners and rear-camera contact.

4. Current case option: clear TPU

MEZON currently lists a crystal-clear slim TPU case for the Galaxy S22+.

Clear TPU case for Samsung Galaxy S22+

  • transparent finish to keep the original phone colour visible;
  • flexible TPU for extra grip and everyday shock absorption;
  • slim wireless-charging-compatible design;
  • model-specific cut-outs around the S22+ camera and controls.

5. Five current screen-protection choices

Ultra-clear film

Ultra-clear film adds very little thickness and keeps the screen glossy.

Matte film

Matte film reduces glare and visible fingerprints.

Hydrogel film

Hydrogel film is flexible, close-fitting and specifically listed as fingerprint-sensor compatible.

Hydrogel film for Samsung Galaxy S22+

Case-friendly tempered glass

Case-friendly tempered glass is the standard clear hard-glass option currently listed for the S22+.

Privacy tempered glass

Privacy anti-spy glass reduces off-angle visibility when you use the phone in public.

Privacy tempered glass for Samsung Galaxy S22+

6. Which S22+ protector should you choose?

Protector Main advantage Best for
Ultra-clear film Very thin glossy protection Minimal visual change
Matte film Reduced glare and visible fingerprints Bright environments
Hydrogel film Flexible, close-fitting coverage Minimal thickness and case compatibility
Case-friendly tempered glass Hard 9H surface with extra edge clearance Tightly fitted cases
Privacy tempered glass Restricts side viewing Extra visual privacy in public

Note that the current MEZON S22+ collection does not list the standard full-cover clear tempered glass available for some other Galaxy models.

7. Installation tips & common mistakes to avoid

Clean preparation and accurate alignment are especially important on Galaxy S-series displays.

  • Wash and dry your hands before starting.
  • Work on a clean, stable surface away from fans, open windows and airborne dust.
  • Clean the display thoroughly with the supplied cleaning materials.
  • Remove every visible dust particle before exposing the adhesive side.
  • Check the top, bottom and camera alignment before applying the protector fully.
  • For film or hydrogel, apply progressively and smooth the material across the screen rather than pressing the whole protector down at once.
  • For tempered glass, perform a dry alignment check first, then lower the glass evenly and allow the adhesive to spread.
  • Avoid repeatedly lifting and repositioning the protector, which can introduce dust or weaken adhesion.
  • After installation, test fingerprint unlocking. If recognition becomes less consistent, remove any trapped air over the sensor area and re-register your fingerprint if necessary.
  • If you use a case, install the screen protector first and make sure the case edge does not push against it.

8. Recommended Galaxy S22+ combinations

Low-profile everyday setup: clear TPU case + hydrogel.

Hard-glass setup: clear TPU case + case-friendly tempered glass.

Privacy-focused setup: clear TPU case + privacy tempered glass.

9. FAQ: Galaxy S22+ protection

Does MEZON currently sell a case for S22+?

Yes. A clear slim TPU case is currently listed.

Does the collection include full-cover clear glass?

Not currently. The hard-glass options listed are case-friendly clear glass and privacy glass.

Which protector is best for fingerprint compatibility?

MEZON specifically labels the hydrogel protector as fingerprint-sensor compatible.

Can standard S22 protectors fit S22+?

No. The S22+ uses a larger 6.6-inch display.

Why choose privacy glass?

It is useful if you want to make the screen harder to read from side angles in public spaces.

Browse all current products in the Samsung Galaxy S22+ collection at MEZON.

Back to blog