OPPO Reno8 Pro 5G Cases & Screen Protectors: Complete Guide

The OPPO Reno8 Pro 5G was the premium model in the Reno8 family, with a larger 120Hz AMOLED display, Dimensity 8100-MAX processor, MariSilicon X imaging NPU and Sony IMX766 camera. Its display remains one of the strongest reasons to protect the phone carefully. MEZON currently offers five screen-protection formats for it.

1. Confirm the OPPO Reno8 Pro 5G model

Open Settings → About device and confirm OPPO Reno8 Pro 5G (CPH2357). Reno8, Reno8 Lite and Reno8 Pro protectors are separate products.

2. OPPO Reno8 Pro 5G at a glance

• 6.7-inch FHD flexible AMOLED: 2412 × 1080 resolution with up to a 120Hz refresh rate.
• Up to 950-nit peak brightness: Clear protection helps preserve the display’s premium look.
• Gorilla Glass 5: Useful built-in protection against everyday wear, but not scratch-proof.
• 50MP Sony IMX766 main camera: Supported by an 8MP ultra-wide and 2MP macro camera.
• 32MP Sony IMX709 autofocus front camera: One of the Pro model’s key imaging features.
• MariSilicon X NPU: Dedicated imaging hardware that distinguished the Pro from the standard Reno8.
• Dimensity 8100-MAX: High-performance 5G chipset for its generation.
• 4500mAh battery: Paired with 80W SUPERVOOC charging.
• In-display fingerprint sensor: Protector installation quality can affect recognition consistency.
• About 183g and 7.34mm: Very slim for a 6.7-inch premium phone.

3. Preserve the premium display without making the phone feel bulky

The Reno8 Pro is only about 7.34mm thick, so a low-profile protector suits its original design. Film and hydrogel keep the setup thin, while glass is better if you prioritise a rigid surface over minimum thickness.

4. Five ways to protect the Reno8 Pro screen

Ultra-clear film

The 3-pack ultra-clear film is the simplest glossy option and adds minimal visual change.

Matte anti-glare film

The 3-pack matte film reduces glare and fingerprints—useful on a large bright display.

Hydrogel film

The 3-pack hydrogel film provides flexible close coverage while adding very little thickness.

Case-friendly tempered glass

The 2-pack case-friendly tempered glass combines a hard 9H surface with more room around the outer edge.

Full-cover tempered glass

The 2-pack full-cover tempered glass is for users who prefer broader rigid coverage across the front.

5. Which protector suits a premium Reno best?

Protector	Main advantage	Best for
Ultra-clear film	Very thin glossy protection	Minimal visual change
Matte film	Reduced reflections and fingerprints	Anti-glare preference
Hydrogel film	Flexible close coverage	Minimal thickness and case compatibility
Case-friendly tempered glass	Hard 9H glass with more perimeter clearance	Tight cases
Full-cover tempered glass	Broader rigid coverage	Users who prefer a glass surface

If you want the Reno8 Pro to retain its slim feel, hydrogel or ultra-clear film are the strongest fits. Matte is useful for reflections, while tempered glass gives the most traditional hard-surface feel.

6. Fingerprint sensor and future case compatibility

The Reno8 Pro uses an in-display fingerprint sensor. Test recognition after installation and re-register your fingerprint if needed. MEZON’s current collection does not list a case, so if you source one separately, case-friendly glass or a thin film protector gives the safest edge clearance.

7. Installation tips & common mistakes to avoid

Good preparation matters as much as the protector itself. Dust, poor alignment and repeated repositioning are the main causes of disappointing results.

• Wash and dry your hands before starting.
• Work on a clean, stable surface away from open windows, fans and airborne dust.
• Clean the display thoroughly with the supplied cleaning materials.
• Remove every visible dust particle before exposing the adhesive side.
• Check orientation and alignment before applying the protector fully.
• For film or hydrogel, apply progressively and use the installation card to smooth the protector across the display.
• For tempered glass, do a dry alignment check first, then lower the glass evenly and allow the adhesive to spread.
• Avoid repeatedly lifting and reapplying the protector, as this can introduce dust or weaken adhesion.
• Test the in-display fingerprint reader after installation and re-register your fingerprint if recognition becomes less consistent.
• If you add a case, install the screen protector first and make sure the case edge does not push against it.

8. Current Reno8 Pro 5G range at MEZON

The current collection contains all five screen-protector styles and no case: ultra-clear, matte, hydrogel, case-friendly tempered glass and full-cover tempered glass.

9. FAQ: OPPO Reno8 Pro 5G protection

Can Reno8 5G screen protectors fit Reno8 Pro?

No. The Pro uses a larger 6.7-inch display and has its own model-specific fit.

Which protector keeps the phone feeling thinnest?

Ultra-clear film or hydrogel adds the least thickness.

Which option is best for glare?

Choose the matte film.

Will tempered glass affect fingerprint unlocking?

It can affect recognition if installation or thickness is not ideal, so test the sensor after fitting the protector.

Does MEZON currently sell a Reno8 Pro case?

No. The live collection currently consists of five screen protectors.

Compare all current options in the OPPO Reno8 Pro 5G screen protector collection at MEZON.