Apple iPhone 13 Cases & Screen Protectors: Complete Guide

Looking for the right protection for your Apple iPhone 13? This 2026 guide combines practical device information with a product-by-product look at every compatible accessory currently listed for this model at MEZON.

1. Confirm your iPhone 13

Before ordering, open Settings > General > About and confirm the exact model. iPhones from the same generation can use different screen dimensions, camera modules and case measurements.

2. iPhone 13 at a glance: technical highlights

The iPhone 13 is more than just its screen size. These are some of the technical details that make the model distinctive:

• Display: 6.1-inch Super Retina XDR OLED, 2532 × 1170 resolution at 460 ppi, with HDR and True Tone.
• Chip: A15 Bionic with a 6-core CPU, 4-core GPU and 16-core Neural Engine.
• Cameras: Dual 12 MP Wide and Ultra Wide cameras; the Wide camera uses sensor-shift optical image stabilisation.
• Video: Cinematic mode introduced rack-focus style depth effects to iPhone video.
• Build & charging: Ceramic Shield front, IP68 resistance and MagSafe wireless charging support.

Face ID: this iPhone uses Apple’s TrueDepth facial-authentication system rather than an in-display fingerprint reader, so there is no fingerprint sensor underneath the screen protector.

Device specifications referenced from Apple Support technical specifications.

3. Why the right protection matters

The front display, rear glass and raised camera area experience different kinds of everyday wear. Flexible films are thin and light, hydrogel offers broader flexible coverage, tempered glass adds a harder sacrificial layer, and cases protect the phone body and corners. The best setup depends on the surfaces you most want to protect.

4. Case options for iPhone 13

4.1. Clear TPU gel case

A slim, flexible transparent case that protects the back, corners and edges while keeping the original iPhone colour visible.

• Flexible TPU helps cushion everyday bumps around corners and edges.
• Clear design keeps the original iPhone finish visible.
• Slim shape improves grip without turning the phone into a bulky device.
• Designed to remain compatible with wireless charging.

Choose the clear case if you want unobtrusive everyday body protection.

Recommended from MEZON: Clear TPU Gel Case for iPhone 13

5. Screen protector options for iPhone 13

5.1. Film & hydrogel protectors

5.1.1. Ultra-clear TPU film

A very thin transparent film designed mainly for everyday scratch protection while keeping the screen close to its original glossy appearance.

• Ultra-clear finish preserves colour and brightness.
• Flexible TPU adds a replaceable layer against fine scratches and abrasion.
• Case-friendly cut leaves sensible clearance around the perimeter.
• Three protectors are included for future replacement.

Choose clear TPU film if minimum thickness and a near bare-screen feel are your priorities.

Recommended from MEZON: [3 Pack] Ultra Clear TPU Film Screen Protectors for iPhone 13

5.1.2. Anti-glare matte TPU film

A thin flexible screen film with a matte surface that reduces reflections and makes fingerprints less noticeable.

• Matte finish reduces glare under bright indoor lighting and sunlight.
• Fingerprints and smudges are less obvious than on a glossy surface.
• Thin TPU keeps protection light and flexible.
• Three protectors are included.

Choose matte film if glare reduction matters more than maximum gloss.

Recommended from MEZON: [3 Pack] Anti-Glare Matte TPU Film Screen Protectors for iPhone 13

5.1.3. Clear hydrogel film

A soft, highly flexible clear protector designed for broad edge-to-edge coverage with very little added thickness.

• Flexible material conforms closely to the screen.
• Broad coverage protects more of the front surface.
• Clear finish keeps the display glossy and easy to see.
• Very fine surface marks can become less noticeable as the material settles.

Choose hydrogel if you want flexible, nearly invisible full-coverage protection.

Recommended from MEZON: [3 Pack] Clear Hydrogel Screen Protectors for iPhone 13

5.2. Tempered glass protectors

5.2.1. Case-friendly tempered glass

A hard 9H tempered-glass protector cut slightly smaller around the perimeter to leave extra clearance near the screen edges.

• Hard glass provides stronger scratch and impact protection than flexible film.
• Case-friendly sizing leaves extra perimeter clearance.
• Smooth glass surface feels familiar for swiping and typing.
• Two protectors are included.

Choose case-friendly glass if impact protection and compatibility with protective cases are your priorities.

Recommended from MEZON: [2 Pack] Case-Friendly Tempered Glass for iPhone 13

5.2.2. Full-cover tempered glass

A hard 9H glass protector designed to extend further towards the screen edges for broader front coverage.

• Broader front coverage than the smaller case-friendly glass.
• Hard tempered glass acts as a sacrificial layer against scratches and knocks.
• Smooth glass-like touch suits everyday scrolling and typing.
• Two protectors are included.

Choose full-cover glass if you want broader front coverage with the harder feel of tempered glass.

Recommended from MEZON: [2 Pack] Full-Cover Tempered Glass for iPhone 13

6. Which accessory should you choose?

Use the table below as a quick guide:

7. Installation & compatibility tips

• Screen protectors: clean the display carefully, remove all dust and dry-align the protector before exposing adhesive.
• Flexible films: apply progressively and move larger bubbles gently towards the edge.
• Tempered glass: lower the glass carefully and let the adhesive spread naturally; repeated lifting can introduce dust.
• Cases: fit the case after the screen protector has settled and check that the case lip does not push against the protector edge.
• Face ID: all of these iPhones use Face ID rather than an under-display fingerprint sensor. Keep the front sensor/camera area clean and correctly aligned.

8. Complete current MEZON range for iPhone 13

The table below brings every accessory in this article together in one place.

9. FAQ: iPhone 13 accessories

Tempered glass or film?

Choose tempered glass when harder impact protection is the priority. Choose film when you prefer minimal thickness; hydrogel is the more flexible full-coverage film option.

Will a screen protector interfere with Face ID?

A correctly fitted model-specific protector is designed around the iPhone’s front layout. Keep the TrueDepth camera area clean and correctly aligned.

Case-friendly or full-cover tempered glass?

Case-friendly glass leaves more clearance around the perimeter; full-cover glass extends further towards the edges.

Clear TPU film or hydrogel?

Clear TPU is a straightforward ultra-thin scratch shield. Hydrogel is softer and more flexible and is designed for broader coverage.

Can I use an accessory made for another iPhone model?

No. Use an accessory specifically listed for the iPhone 13.

Shop the current MEZON iPhone 13 collection